LEGO Birthday Cake

I made Oliver & Jo's LEGO birthday cake! I'd seen a few cakes like these online, but couldn't find any tutorials on how to make them. I did my best, but I wish I'd taken the time at the beginning to cut the sides of the cake to be completely straight. The final product looks a little bumpy. Live and learn, right?

I started work on the bricks a few days before I baked the cake. I bought silicon LEGO block molds that were fairly inexpensive on Amazon (3 for $7.75). I also bought fondant this year instead of making my own. I used an online coupon from Michael's and bought fondant for $5.

I used a melon baller to help measure to make sure my blocks were all about the same size. The first set of fondant LEGO blocks got stuck in the mold. I dusted in the inside with powdered sugar, and that fixed the problem. The rest came out without any problems.

My final supply list:
Fondant pack of green, red, yellow, and blue
White fondant
Powdered sugar (to dust the inside of the molds)
Silicone LEGO block molds
2 boxes of cake (and the ingredients needed to make the cake--eggs, oil, etc)
1 can of frosting (for the crumb layer)
Black gel frosting for the lettering
LEGO figures to decorate the cake

I didn't want to use the blocks up the size of the cake. Instead, I just cut out rectangles from rolled fondant to look like the sizes of the LEGO blocks. I kept all of the fondant pieces in the fridge so they wouldn't lose their shape. 

Two nights before the party, I baked the cake. I used two boxes of cake mix, and I made two 13x9 inch cakes. The next day, I frosted and stacked them as a crumb layer. That afternoon, I covered the cake in a very thin layer of white fondant. It will save you a lot of trouble later if you make sure all of the sides are as flat as possible! I dampened one size of the rectangles (water helps the fondant stick), and I built up the walls in a LEGO brick pattern. You can see my progress here:

When I finished, I added some strips of rolled white fondant and made it look like Emmett was unrolling it onto the cake. I stuck fondant on the bottom of the LEGO figures to get them to stick to the cake.

To make the lettering, I just printed a picture of "Happy Birthday" in LEGO font. I set it over the fondant and cut out the red. Then I set it over the fondant and cut out the yellow, and then I set it over the fondant and cut out the white. I stacked them, and then outlined the white lettering in frosting. I made a makeshift frosting bag out of fondant for Good Cop to hold to try to make it look like he was writing "Happy Birthday."

I found the candy letters at the grocery store. I wanted to give each of the LEGO Movie characters a job, so Benny got the letter R to look like he was spelling out the names.

When the fondant was still soft, I stuck Wyldstyle's arms in the block. I refrigerated her and the block until it was hard, and then I added them to the cake.

Larry the barista is helping make the cake, too!

There's the finished cake! I'd added the white frosting shells to the top to conceal the spot where the sides met the top. I didn't like how it turned out, so I covered it up ;-) I finished the evening before the party and then kept it in the fridge so the fondant wouldn't get too soft and start to droop.

It took a lot of planning and work. I really wish I'd spent more time getting the sides straight, but I still love the cake. It's a lot of fun!

Diaper Wreath & Knit Booties

I spotted a cute "diaper wreath" on Pinterest, but it was only available for ordering. Since I had leftover diapers from the diaper cake, I wanted to make one myself. Here's how I did it:

Step 1: Take a wire hanger and bent it into the shape of a wreath.

Step 2: I took an extra receiving cloth that I had (also leftover from the diaper cake), folded in half into a triangle, and then rolled it up around the hanger to give it padding. You could tightly roll diapers around the wreath for padding if you'd prefer.

Step 3: Open each diaper and insert the wreath into the opening. Secure the top of each diaper with a rubber band, like so:

Here's what mine looked like after tying on each diaper. I used nineteen size 1 diapers.

Step 4: Tie ribbon over each rubber band and curl it. I think the orange ribbon on the original pin was very cute, but I only had baby colors available.

Step 5: Using extra ribbon, tie on any extra goodies you want to include on your wreath. I included some outlet safety covers, two pairs of booties that I made, a teething toy, a pacifier, and some hair bows.

Here are close-ups of the booties I made (also a Pinterest find, which you can view here).

My Attempt at the Baby Bump Cake

Once again, browsing Pinterest has be in over my head! I have so many things planned for the shower this weekend, and so little time to get them done! Heaven help me, I found a really cute "Baby Bump Cake" pin on Pinterest. I decided to tackle that project today.

I looked at craft stores for a half-ball cake pan but had no luck. I ended up ordering an 8" one from Amazon for about $8. I used two boxes of cake mix for this project. After mixing one box, I made two cupcakes and poured the rest into a 13"x9" cake pan. I used a full box of mix for the half-ball (make sure to grease & flour your ball pan really well!). In addition to boxed mix, I also just used a can of pre-made frosting from the store for the crumb layer.

Here's how I decorated mine:

Step 1: Spread a layer of frosting over your sheet cake.

Step 2: Arrange the ball cake and cupcakes on the sheet cake.

Step 3: Trim away the excess cake on the sides (don't discard or eat that cake yet!).

Step 4: Use the parts of the cake you cut off to fill in some gaps in the "body," using frosting as your glue. Below, you can see the cupcakes before and after I filled the gaps.

Before:

 After:

Step 5: Use the rest of your frosting to create a fairly seamless and smooth cake. The frosting can be very thin. 

Step 6: Use fondant to decorate! You can buy some pre-made at a craft store or cake supply shop. I made my own using this "Rolled Buttercream Fondant" recipe. Originally, I intended to use brown trim like in the original pin, but my brown fondant looked like turds. That wasn't very appetizing, so I scraped that and went with pink.

I have only worked with fondant twice before and still am not at master with it. The surface of my cake has some cracks and stretch marks, but I figure that's just more realistic, right? ;-)

With the cake done, there's not much left for me to do until the morning of the shower. Let's just hope the weather doesn't put a damper on our party... the forecast calls for 8 to 14 inches of snow!

Look What the Stork Brought! Diapers for the Baby Shower!

I'm starting to get things ready for my friend's baby shower this weekend. I bought two packs of 50 diapers to make the diaper tricycle for her shower. It called for 55 diapers, but I ended up using 52. It also called for 2 receiving blankets, and I bought a pack of 5. The tricycle needed 2 bibs, and I bought a pack of 3. So, I've been getting crafty with my leftover supplies! I'd found a really cute pin on Pinterest that showed a stork carrying a sack of diapers (here: http://pinterest.com/pin/216383957067889576/). Unfortunately, like some links on Pinterest, clicking the image takes me nowhere. I had to figure out how to make it myself!

Here are the storks I came up with:

To make these, you need: